Why FloMax® Air Atomising Nozzles?
| In gas conditioning, small uniform drops are the ideal - giving more surface area per
liquid volume, more complete reaction and total absorption without wetting.
FloMax low pressure nozzles not only give much smaller and more uniform drops
than the most efficient high pressure hydraulic nozzles. With their unique patented
3-stage atomisation design, they also outperform other air atomising nozzles. |
 |
Among the benefits:
- Reduced dwell time and risk of wetting.
- Wide turndown ratio - up to 10:1 - easily achieved.
- Large flow per nozzle - fewer nozzles needed, smaller cooling towers possible.
- Big energy savings.
- Low maintenance.
|
 |
| |
FloMax - Operating Principle
Stage 1. Primary fluid break-up, as air and liquid combine.
Stage 2. Secondary break-up, as focused stream impacts target bolt.
Stage 3. Final atomisation through air cap.
|
|
|
